Acrygel SYNC (60g Tube) - White
£18.37
In stock
Creating an account with INK has many benefits
At INK Nails, we cater exclusively to professionals. Don't have an account yet? No worries! Discover the exclusive benefits of registering an account today.
- Professional Only Products
- Access to Exclusive Trade Prices
- Superb Support Network
Acrygel Sync is a polymer based UV/LED curable nail enhancement system. A versatile system that encompasses the best properties of both gel and acrylic.
Low Heat
Unlimited Work Time
Easy File (Compared to Acrylics/Hard Gel)
Low Odour
Use in conjunction with Sync Liquid. A common mistake made by techs using this type of system is the drenching of the uncured product with liquid. Sync Liquid is a slow evaporating solution designed to keep your brush damper for longer which ultimately helps you to work dryer, safer and more successfully as you mould Sync into position.
Application Guide:
- Prepare the nail as you would for any enhancement system
- Apply Prime Bond sparingly‚ alternatively you may prefer to apply one of our base coats (for best results please use Fluid Rubber) prior to your Sync application. The latter is recommended for clients with flexible and weak nails.
- Gently squeeze Sync from the tube (or pick up from the jar) on to the steel end of your Acrygel brush and apply on the nail approximately 2mm from the cuticle area.
- Dampen your Acrygel brush with Sync Liquid before moulding to your desired shape.
- Once content with your design proceed to cure Sync for 120 seconds in your INK Lamp. For thinner layers using Clear you may feel as if 60 seconds is long enough‚ please ignore your feeling and proceed to cure for 120 seconds. Sync is a complex product and a full cure is key for successful results. Immediately after curing, Sync can often feel too flexible, this will harden considerably several hours after the service. When sculpting it is always advisable to turn the hand in the lamp for 30 seconds after removing the form
*Please note: White Sync is extremely highly pigmented and is designed for use in thin layers, depending upon the applied thickness you may need to add 60 seconds to the cure time.
- Wipe away the dispersion layer with INK Cleaner prior to finish filing
- Apply INK top coat and cure for 60 seconds (All INK top coats are suited to the product)
Removal: Sync is manufactured using multiple EU sourced & EU compliant components in concentrations that adhere to EU cosmetics laws (CPNP registered). Some are acetone resistant and some are not resistant. So, can it be soaked off? Unfortunately not or at least not in a timescale we feel is speedy enough to classify the product as soak off. The application of a base coat underneath does help with its soakability but only really after filing down the bulk before soaking for a considerable period of time. However, as the headline reads further up the page Easy File, this is a completely honest and accurate statement. For those of you accustomed to filing L&P or hard gels it will feel like all your Christmases have come at once.
Low Heat
Unlimited Work Time
Easy File (Compared to Acrylics/Hard Gel)
Low Odour
Use in conjunction with Sync Liquid. A common mistake made by techs using this type of system is the drenching of the uncured product with liquid. Sync Liquid is a slow evaporating solution designed to keep your brush damper for longer which ultimately helps you to work dryer, safer and more successfully as you mould Sync into position.
Application Guide:
- Prepare the nail as you would for any enhancement system
- Apply Prime Bond sparingly‚ alternatively you may prefer to apply one of our base coats (for best results please use Fluid Rubber) prior to your Sync application. The latter is recommended for clients with flexible and weak nails.
- Gently squeeze Sync from the tube (or pick up from the jar) on to the steel end of your Acrygel brush and apply on the nail approximately 2mm from the cuticle area.
- Dampen your Acrygel brush with Sync Liquid before moulding to your desired shape.
- Once content with your design proceed to cure Sync for 120 seconds in your INK Lamp. For thinner layers using Clear you may feel as if 60 seconds is long enough‚ please ignore your feeling and proceed to cure for 120 seconds. Sync is a complex product and a full cure is key for successful results. Immediately after curing, Sync can often feel too flexible, this will harden considerably several hours after the service. When sculpting it is always advisable to turn the hand in the lamp for 30 seconds after removing the form
*Please note: White Sync is extremely highly pigmented and is designed for use in thin layers, depending upon the applied thickness you may need to add 60 seconds to the cure time.
- Wipe away the dispersion layer with INK Cleaner prior to finish filing
- Apply INK top coat and cure for 60 seconds (All INK top coats are suited to the product)
Removal: Sync is manufactured using multiple EU sourced & EU compliant components in concentrations that adhere to EU cosmetics laws (CPNP registered). Some are acetone resistant and some are not resistant. So, can it be soaked off? Unfortunately not or at least not in a timescale we feel is speedy enough to classify the product as soak off. The application of a base coat underneath does help with its soakability but only really after filing down the bulk before soaking for a considerable period of time. However, as the headline reads further up the page Easy File, this is a completely honest and accurate statement. For those of you accustomed to filing L&P or hard gels it will feel like all your Christmases have come at once.
Free UK shipping on orders over £70.00 (Excl VAT)
Orders placed before 2pm (Monday-Friday) will be delivered on the next working day (UK Mainland) between the hours of 7am and 7pm.
Orders placed after 2pm during the week or at weekends are despatched the following working day. No orders are processed, despatched or delivered on bank holidays or weekends. A text and/or email will be sent confirming despatch and on the morning of delivery an estimated time of arrival (a 1 hour time slot).
Write Your Own Review
You may also like
